Owner's Manual - Page 308

For 2020 SUBARU CROSSTREK.

Loading ...
Loading ...
Loading ...
(306,1)
北米Model "A1370BE-B" EDITED: 2019/ 11/ 12
X-MODE indicator (type A)
X-MODE indicator (type B)
To activate:
Press the X-MODE switch. While the X-
MODE is activated, the X-MODE indicator
appears.
To deactivate:
Press the X-MODE switch again. The X-
MODE indicator will disappear when the X-
MODE is deactivated.
NOTE
. Even if you try to activate the X-
MODE by pressing the X-MODE switch
when the vehicle speed is 12 mph (20
km/h) or more, the X-MODE will not be
activated. At this time, a buzzer will
sound twice.
. If the vehicle speed reaches 25 mph
(40 km/h) or more while the X-MODE is
activated, a buzzer will sound once and
the X-MODE will be deactivated.
. The SI-DRIVE mode will change to
the Intelligent (I) mode when the X-
MODE is deactivated.
. The SI-DRIVE mode will not be
affected even if the SI-DRIVE switch is
pressed while the X-MODE is activated.
At this time, the buzzer will sound
twice.
. While the engine is running, if any of
the following conditions is met, the X-
MODE will be deactivated. In this case,
it is not possible to activate the X-
MODE.
Also, the mode will change to the
Intelligent (I) mode and it will not be
possible to change to the other modes.
The CHECK ENGINE warning
light/malfunction indicator light illu-
minates.
The ABS warning light illumi-
nates.
The Vehicle Dynamics Control
warning light illuminates.
. If the engine could overheat because
of a temperature increase of the engine
coolant, it may not be possible to
activate the X-MODE. Even while the
X-MODE is activated, the X-MODE will
be deactivated when the engine coolant
temperature increases. In this case, the
mode will change to the Intelligent (I)
mode.
& Hill descent control function
S07BI03
The hill descent control function will be in
standby mode when the X-MODE is
activated and the vehicle speed is less
than approximately 12 mph (20 km/h).
The function will operate when the vehicle
speed is less than approximately 12 mph
(20 km/h) and the accelerator ratio is less
than approximately 10%.
The function will turn off when the vehicle
speed is more than approximately 12 mph
(20 km/h) and the accelerator pedal is
depressed.
Starting and operating/X-MODE
7-42
Loading ...
Loading ...
Loading ...