Loading ...
Loading ...
Loading ...
07 Driver support
07
187
WARNING
Adaptive Cruise Control only warns of
vehicles detected by the radar sensor, see
Adaptive Cruise Control – limitations
(p. 193). In some cases there may be no
warning or the warning may be delayed.
The driver should always apply the brakes
when necessary.
Steep inclines and/or heavy loads
ACC is primarily intended for use on fairly
level roads. The system may have difficulty
maintaining the correct distance to a vehicle
ahead on steep inclines, if the vehicle is car-
rying a heavy load or is towing a trailer. In
these situations, the driver should always be
prepared to apply the brakes if necessary.
Related information
•
Adaptive Cruise Control – introduction
(p. 184)
Adaptive Cruise Control – engaging
Putting ACC in standby mode
Before ACC can be used to regulate speed
and/or the distance to a vehicle ahead, it
must first be put in standby mode.
To do so:
Controls and display
Off/On/Standby mode
•
Press
(2).
> The same symbol (7) appears (in white) in
the instrument panel to indicate that ACC
is in standby mode.
NOTE
The driver's door must be closed and the
driver's seat belt must be fastened before
ACC can be put in active mode. If the driv-
er's seat belt is taken off or if the driver's
door is opened, ACC will return to standby
mode.
Related information
•
Adaptive Cruise Control – introduction
(p. 184)
Loading ...
Loading ...
Loading ...