Loading ...
Loading ...
Loading ...
06 Locks and alarm
06
170
Power tailgate – programming
The tailgate's maximum opening angle can be
programmed, which can be useful, for exam-
ple, if the tailgate has to be opened in a
garage with a low ceiling.
To do so:
•
Open the tailgate manually, hold it at the
desired maximum opening angle and
press the tailgate's closing button for at
least 3 seconds. When the tailgate is
released, programming is complete.
•
To remove this programming, open the
tailgate manually to a higher opening
angle and press the tailgate's closing but-
ton for at least 3 seconds.
Related information
•
Locking/unlocking – tailgate (p. 168)
Power tailgate – interruption
Automatic opening or closing the tailgate can
be interrupted in four ways:
•
By pressing the
button on the
lighting panel.
•
By pressing the
button on the
remote key.
•
By pressing the button on the lower edge
of the tailgate.
•
By pressing the rubber-covered button
under the outer handle on the tailgate.
If one of these actions is taken, the tailgate
will stop moving.
Pinch protection
If the tailgate is obstructed while it is being
operated, the pinch protection function is
activated.
•
If the tailgate is being opened, the electri-
cal function will be switched off and the
tailgate will stop.
•
If the tailgate is being closed, it will stop
and move slightly in the opposite direc-
tion.
Related information
•
Locking/unlocking – tailgate (p. 168)
Power tailgate – manual opening/
closing
The power tailgate can be disconnected from
the vehicle’s electrical system.
This is done by quickly pulling the outer han-
dle twice. The tailgate can then be opened/
closed manually.
Related information
•
Locking/unlocking – tailgate (p. 168)
Loading ...
Loading ...
Loading ...