Loading ...
Loading ...
Loading ...
||
06 Locks and alarm
06
160
Opening the remote key
The remote key has one CR 2430, 3V battery
only
To open the remote key
Slide the spring loaded catch to the
side.
Pull the key blade straight out of the
remote key.
Insert a small screwdriver in the hole
behind the spring loaded catch and care-
fully pry up the cover. Turn the remote
key with the buttons upward so that the
battery does not fall out when the cover is
removed.
Inserting a new battery
CAUTION
When handling batteries, avoid touching
their contact surfaces as this could result
in poor battery function in the remote key.
Note the position of the battery's (+) or (–)
sides.
1. Use a screwdriver to pry out the old bat-
tery.
2. Insert a new one with the (+) side down-
ward.
Closing the remote key
1. Press the remote key's cover into place.
2. Hold the remote key with the slot for the
key blade up.
3. Carefully slide the key blade into its
groove.
4. Gently press the key blade in the groove
until it clicks into place.
NOTE
Volvo recommends that the batteries used
in the remote control meet the UN Manual
of Test and Criteria, Part III, sub-section
38.3.
Batteries installed in the key from the fac-
tory and batteries exchanged by an
authorized Volvo workshop fulfill the above
criteria.
Old batteries should be disposed of prop-
erly at a recycling center or at your Volvo
retailer.
Related information
•
Remote key – functions (p. 155)
Loading ...
Loading ...
Loading ...