Loading ...
Loading ...
Loading ...
Loosen 3 screws, arrow.
2. Push the heat shield forward and the
bumper back in order to be able to reach
the fog light.
3. Turn the bulb socket counterclockwise
and remove.
The wire is long enough to guide the
socket down and through between any
heat shield that may be installed and the
bumper.
4. Replace nonworking bulb.
5. To install the new bulb, proceed in re-
verse order of removal.
Vehicle with two rear fog lights
Follow the general instructions on lights
and bulbs, refer to page 283.
Bulbs: W16W
Left rear fog light:
1. On vehicles with heat shield:
Loosen 3 screws, arrow.
2. Push the heat shield forward and the
bumper back in order to be able to reach
the fog light.
3. Turn the bulb socket counterclockwise
and remove.
The wire is long enough to guide the
socket down and through between any
heat shield that may be installed and the
bumper.
4. Replace nonworking bulb.
5. To install the new bulb, proceed in re-
verse order of removal.
Right fog light:
1. Turn the bulb socket counterclockwise
and remove.
The wire is long enough to guide the
socket down and through between any
Seite 289
Replacing components MOBILITY
289
Online Edition for Part no. 01402723778 - VI/18
Loading ...
Loading ...
Loading ...