User Manual - Page 177

For 2019 CONVERTIBLE.

Loading ...
Loading ...
Loading ...
Braking intervention
The warning prompts the driver to react.
During a warning, the maximum braking
force is used. Prerequisite for the brake
booster is sufficiently quick and sufficiently
hard stepping on the brake pedal. If there is
a risk of collision, the system may assist
with braking.When the vehicle is traveling
at a low speed, the vehicle may come to a
complete stop.
Manual transmission: during a braking in-
tervention up to a complete stop, the engine
may be shut down.
The braking intervention occurs only if ve-
hicle stability has not been restricted,
for instance by deactivating the DSC Dy-
namic Stability Control.
The driver may cancel the braking interven-
tion by stepping on the accelerator pedal or
by actively moving the steering wheel.
Object detection can be restricted. Follow
the limitations of the detection range and
functional restrictions.
System limits
Safety information
WARNING
The system can react not at all, too late, in-
correctly, or without justification due to
the system limits. There is a risk of acci-
dents or risk of damage to property. Follow
the information regarding the system lim-
its and actively intervene if needed.
Detection range
The detection potential of the camera is lim-
ited.
Thus, a warning might not be issued or be
issued late.
E.g., the following situations may not be de-
tected:
Partially covered pedestrians.
Pedestrians that are not detected as
such because of the viewing angle or
contour.
Pedestrians outside of the detection
range.
Pedestrians having a body size less than
32 in/80 cm.
Functional limitations
The system may not be fully functional or
may not be available in the following situa-
tions:
In heavy fog, wet conditions, or snow-
fall.
In tight curves.
If the field of view of the camera or the
windshield are dirty or covered.
If the driving stability control systems
are deactivated, for instance DSC OFF.
Up to 10 seconds after the start of the
engine via the Start/Stop button.
During calibration of the camera imme-
diately after vehicle delivery.
If there are constant blinding effects be-
cause of oncoming light, for instance
from the sun low in the sky.
When it is dark outside.
Brake force display
Concept
Additional brake lights indicate emergency
braking to the traffic behind. This can re-
duce the risk of a rear-end collision.
Seite 177
Safety CONTROLS
177
Online Edition for Part no. 01402723778 - VI/18
Loading ...
Loading ...
Loading ...