Loading ...
Loading ...
Loading ...
Reprogramming individual buttons
1. Switch on the ignition.
2. Press and hold the interior mirror but-
ton to be programmed.
3. As soon as the interior mirror LED
starts flashing slowly, hold the hand-
held transmitter for the system to be
controlled approx. 1 to 3 inches/2.5 to
8 cm away from the buttons of the inte-
rior mirror. The required distance de-
pends on the hand-held transmitter.
4. Likewise, press and hold the button of
the desired function on the hand-held
transmitter.
5. Release both buttons as soon as the in-
terior mirror LED flashes more rapidly.
The LED flashing faster indicates that
the button on the interior mirror has
been programmed. The system can then
be controlled by the button on the inte-
rior mirror.
If the LED does not flash faster after at
most 60 seconds, change the distance
and repeat the programming starting
with step 4. Several more attempts at
different distances may be necessary.
Wait at least 15 seconds between at-
tempts.
Canada: if programming with the hand-
held transmitter was interrupted, hold
down the interior mirror button and re-
peatedly press and release the hand-held
transmitter button for 2 seconds.
Operation
WARNING
Body parts can be jammed when operating
remote-controlled systems, such as the ga-
rage door, using the integrated Universal
Remote Control. There is a risk of injury or
risk of damage to property. Make sure that
the area of movement of the respective
system is clear during programming and
operation. Also follow the safety informa-
tion of the hand-held transmitter.
The system, such as the garage door, can be
operated using the button on the interior
mirror while the engine is running or when
the ignition is started. To do this, hold down
the button within receiving range of the
system until the function is activated. The
interior mirror LED stays lit while the wire-
less signal is being transmitted.
Deleting stored functions
Press and hold the two outer buttons on the
interior mirror simultaneously for approxi-
mately 20 seconds until the LED on the in-
terior mirror flashes rapidly. All stored func-
tions will be deleted. The functions cannot
be deleted individually.
Digital compass
Overview
1 Control button
2 Mirror display
Mirror display
The point of the compass is displayed in the
mirror when driving straight.
Seite 216
CONTROLS Interior equipment
216
Online Edition for Part no. 01402723778 - VI/18
Loading ...
Loading ...
Loading ...