Loading ...
Loading ...
Loading ...
Procedure
1. Make sure that there are no large metal-
lic objects or overhead power lines near
the vehicle and that there is sufficient
room to drive around in a circle.
2. Set the currently applicable compass
zone.
3. Make sure that the convertible top is
completely closed.
4. Press and hold the control button for ap-
prox. 6 to 7 seconds so that "C" appears
on the display. Next, drive in a complete
circle at least once at a speed of no more
than 4 mph/7 km/h. If calibration is suc-
cessful, the "C" is replaced by the points
of the compass.
5. Open convertible top completely.
6. Press and hold the control button for ap-
prox. 6 to 7 seconds so that "C" appears
on the display. Next, drive in a complete
circle at least once at a speed of no more
than 4 mph/7 km/h. If calibration is suc-
cessful, the "C" is replaced by the points
of the compass.
Left/right-hand steering
The digital compass is already set for right
or left-hand steering at the factory.
Setting the language
Press and hold the control button for ap-
prox. 12 to 13 seconds. Briefly press the
control button again to switch between
English "E" and German "O".
Settings are stored automatically after ap-
proximately 10 seconds.
Sun visor
Glare shield
To provide protection against glare, fold the
sun visor down or pivot it to the side.
Vanity mirror
A vanity mirror is located in the sun visor
behind a cover.
Front passenger side dash-
board
Decorative trim
Customized decorative trim panels for the
dashboard on the front passenger side are
available as original MINI accessories de-
pending on the equipment specification.
Follow the assembly instructions.
Seite 218
CONTROLS Interior equipment
218
Online Edition for Part no. 01402723778 - VI/18
Loading ...
Loading ...
Loading ...