Loading ...
Loading ...
Loading ...
fully to prevent the vehicle from rolling
away.
1. Loosen the selector lever sleeve, to-
gether with the lower retaining ring,
from the center console. To do so, pull
the retaining ring upward at the rear
edge.
2. Lift the sleeve. Unplug the cable connec-
tor, if needed.
3. Using the screwdriver from the onboard
vehicle tool kit, refer to page 282, press
the yellow release lever downward, see
arrow.
4. Press the button on the front of the se-
lector lever and move the selector lever
back slightly.
Release the release lever.
5. Bring the selector lever into the desired
position.
For additional information, see the chapter
on tow-starting and towing.
Releasing the transmission lock
electronically: with a tap-operated
selector lever
General information
Electronically unlock the transmission lock
to maneuver vehicle from a danger area.
Before unlocking the transmission lock, set
the parking brake to prevent the vehicle
from rolling away.
Engaging selector lever position N
Unlocking is possible, if the starter can spin
the engine.
1. Press and hold down brake pedal.
2. Press the Start/Stop button. The starter
must audibly start.
3. Press the button on the selector lever,
arrow 1, and press and hold the selector
lever into selector lever position N, ar-
row N, until selector lever position N is
displayed in the instrument cluster.
A Check Control message is displayed.
4. Release the selector lever.
5. Release brake, as soon as the starter
stops.
6. Maneuver the vehicle from the danger
area and secure it against moving on its
own.
For additional information, see the chapter
on tow-starting and towing.
Seite 130
CONTROLS Driving
130
Online Edition for Part no. 01402723778 - VI/18
Loading ...
Loading ...
Loading ...