Loading ...
Loading ...
Loading ...
Programming
General information
1. Switch on the ignition.
2. Initial setup:
Press and hold the two outer buttons on
the interior mirror simultaneously for
approximately 20 seconds until the LED
on the interior mirror flashes. This
erases all programming of the buttons
on the interior mirror.
3. Hold the hand-held transmitter for the
system to be controlled approx. 1 to
3 inches/2.5 to 8 cm away from the but-
tons of the interior mirror. The required
distance depends on the hand-held
transmitter.
4. Simultaneously press and hold the but-
ton of the desired function on the hand-
held transmitter and the button to be
programmed on the interior mirror. The
LED on the interior mirror will begin
flashing slowly.
5. Release both buttons as soon as the LED
flashes more rapidly. The LED flashing
faster indicates that the button on the
interior mirror has been programmed.
If the LED does not flash faster after at
least 60 seconds, change the distance
between the interior mirror and the
hand-held transmitter and repeat the
step. Several more attempts at different
distances may be necessary. Wait at
least 15 seconds between attempts.
Canada: if programming with the hand-
held transmitter was interrupted, hold
down the interior mirror button and re-
peatedly press and release the hand-held
transmitter button for 2 seconds.
6. To program other functions on other
buttons, repeat steps 3 to 5.
The systems can be controlled using the in-
terior mirror buttons.
Special feature of the rolling code
wireless system
If you are unable to operate the system af-
ter repeated programming, please check if
the system to be controlled features a roll-
ing code radio system.
Read the system's owner's manual, or press
the programmed button on the interior mir-
ror longer. If the LED on the interior mirror
starts flashing rapidly and then stays lit
constantly for 2 seconds, the system fea-
tures a rolling code radio system. Flashing
and continuous illumination of the LED will
repeat for approximately 20 seconds.
For systems with a rolling code radio sys-
tem, the integrated Universal Remote Con-
trol and the system also have to be
synchronized.
Please read the owner's manual to find out
how to synchronize the system.
Synchronizing is easier with the aid of a
second person.
Synchronizing the universal remote control
with the system:
1. Park the vehicle within range of the re-
mote-controlled system.
2. Program the relevant button on the inte-
rior mirror as described.
3. Locate and press the synchronizing but-
ton on the system being programmed.
You have approx. 30 seconds for the
next step.
4. Hold down the programmed button on
the interior mirror for approximately
3 seconds and then release it. If neces-
sary, repeat this step up to three times
in order to finish synchronization. Once
synchronization is complete, the pro-
grammed function will be carried out.
Seite 215
Interior equipment CONTROLS
215
Online Edition for Part no. 01402723778 - VI/18
Loading ...
Loading ...
Loading ...