Loading ...
Loading ...
Loading ...
#
Screw in the towing eye clockwise as far as it
will go and tighten.
Vehicles with a trailer hitch: Vehicles with a
trailer hitch do not have a rear bracket for the
towing eye. Fasten the tow bar to the trailer
hitch.
%
Make sure that cover 1 engages in the
bumper when you remove the towing eye.
*
NOTE Damage due to incorrect use of
the towing eye
When a towing eye is used to recover a vehi‐
cle, the vehicle may be damaged in the proc‐
ess.
#
Only use the towing eye to tow away or
tow start the vehicle.
Tow starting the vehicle (emergency engine
start)
Vehicles with automatic transmission
*
NOTE Damage to the automatic trans‐
mission due to tow starting
The automatic transmission may be damaged
in the process of tow starting vehicles with
automatic transmission.
#
Vehicles with automatic transmission
must not be tow started.
#
Vehicles with automatic transmission must
not be tow-started.
Electrical fuses
Notes on electrical fuses
&
WARNING Risk of accident and injury
due to overloaded lines
If you manipulate or bridge a faulty fuse or if
you replace it with a fuse with a higher
amperage, the electric line could be overloa‐
ded.
This could result in a fire.
#
Always replace faulty fuses with speci‐
fied new fuses containing the correct
amperage.
*
NOTE Damage due to incorrect fuses
Electrical components or systems may be
damaged by incorrect fuses, or their func‐
tionality may be significantly impaired.
#
Only use fuses that have been approved
by Mercedes-Benz and which have the
correct fuse rating.
Blown fuses must be replaced with fuses of the
same rating, which you can recognize by the
color and fuse rating. The fuse ratings and fur‐
ther information to be observed are listed in the
fuse assignment diagram.
Fuse assignment diagram: on the fuse box in
the cargo compartment (/ page 456).
454
Breakdown assistance
Loading ...
Loading ...
Loading ...