Loading ...
Loading ...
Loading ...
#
Drive forwards or reverse very slowly for
approximately 33 ft (10 m).
#
Pump up the tire again.
After a maximum of ten minutes the tire
pressure must be at least 200 kPa (2.0 bar/
29 psi).
&
WARNING Risk of accident due to the
specified tire pressure not being reached
If the specified tire pressure is not reached
after the specified time, the tire is too badly
damaged. The tire sealant cannot repair the
tire in this instance.
Damaged tires and a tire pressure that is too
low can significantly impair braking and han‐
dling characteristics.
#
Do not continue driving.
#
Consult a qualified specialist workshop.
If, after ten minutes, a tire pressure of
200 kPa (2.0 bar/29 psi) has been attained:
#
Switch off the tire inflation compressor.
#
Unscrew the filling hose from the valve of the
faulty tire.
&
WARNING Risk of accident from driving
with sealed tires
A tire temporarily sealed with tire sealant
impairs driving characteristics and is not
suitable for higher speeds.
#
Adapt your driving style accordingly and
drive carefully.
#
Do not exceed the maximum speed
limit with a tire that has been repaired
using tire sealant.
#
Observe the maximum permissible speed for
a tire sealed with tire sealant 50 mph
(80 km/h).
#
Affix the upper section of the TIREFIT sticker
to the instrument cluster in a location where
it will be easily seen by the driver.
*
NOTE Staining caused by leaking tire
sealant
After use, excess tire sealant may leak out
from the filling hose.
#
Therefore, place the filling hose in the
plastic bag that contained the TIREFIT
kit.
+
ENVIRONMENTAL NOTE Environmental
pollution caused by environmentally irre‐
sponsible disposal
Tire sealant contains pollutants.
#
Have the tire sealant bottle disposed of
professionally, e.g. at an authorized
Mercedes-Benz Center.
#
Stow the tire sealant bottle and the tire infla‐
tion compressor.
#
Pull away immediately.
442
Breakdown assistance
Loading ...
Loading ...
Loading ...