Loading ...
Loading ...
Loading ...
Avoiding unintentional alarms
General information
The tilt alarm sensor and interior motion sensor
can trigger an alarm, although no unauthorized
action occurred.
Possible situations for an unwanted alarm:
▷ In automatic vehicle washes.
▷ In duplex garages.
▷ During transport on trains carrying vehicles, at
sea or on a trailer.
▷ With animals in the vehicle.
▷ When the vehicle is locked after start of fuel‐
ing.
The tilt alarm sensor and the interior motion sen‐
sor can be switched off in such situations.
Switching off the tilt alarm sensor
and interior motion sensor
Press the button on the remote control
within 10 seconds as soon as the vehicle is
locked.
The indicator light lights up for approx. 2 sec‐
onds and then continues to flash.
The tilt alarm sensor and interior motion sensor
are switched off until the vehicle is locked again.
Switching off the alarm
▷ Unlock the vehicle using the remote control,
if needed, through emergency detection of
the remote control, refer to page 82.
▷ With Comfort Access: if you are carrying the
remote control on your person, grasp the
driver side or front passenger side door han‐
dle completely.
Power windows
Safety information
Warning
When operating the windows, body parts and
objects can be jammed. There is a risk of injury
or risk of damage to property. Make sure that
the area of movement of the windows is clear
during opening and closing.
Overview
Power windows
Safety switch
Functional requirements
The windows can be operated under the follow‐
ing conditions.
▷ Standby state is established.
▷ Drive-ready state is activated.
▷ The remote control is in the car's interior.
Opening
▷ Press the switch to the resistance
point.
The window opens while the switch is being
held.
▷ Press the switch beyond the resistance
point.
Seite 99
Opening and closing
CONTROLS
99
Online Edition for Part no. 01402720839 - II/19
Loading ...
Loading ...
Loading ...