Loading ...
Loading ...
Loading ...
Anchors
The respective symbol shows the
anchor for the upper retaining
strap. Seats with an upper top
tether are marked with this sym‐
bol. It can be found on the rear
seat backrest or the rear window shelf.
Routing the retaining strap
1 Direction of travel
2 Head restraint
3 Hook for upper retaining strap
4 Anchor
5 Seat backrest
6 Upper retaining strap
Attaching the upper retaining strap
to the anchor
1.
Raise the head restraint, if needed.
2. Guide the upper retaining strap between the
supports or along both sides of the head re‐
straint to the anchor.
For the middle seat, guide it over or along
both sides of the head restraint to the anchor
where applicable.
3. If there is a retaining strap, run it between the
backrest and the cargo cover.
4. Attach the hook of the retaining strap to the
anchor.
5. Tighten the retaining strap by pulling it down.
6. Lower and lock head restraints as needed.
Locking the doors and
windows in the rear
General information
In certain situations it may be advisable to secure
the rear doors and windows, for instance when
transporting children.
Doors
Push the locking lever on the rear doors up.
The door can now be opened from the outside
only.
Safety switch for the rear
Press the button on the driver's door.
This locks various functions so that they cannot
be operated from the rear. Safety switch, refer to
page 100.
Seite 119
Transporting children safely
CONTROLS
119
Online Edition for Part no. 01402720839 - II/19
Loading ...
Loading ...
Loading ...