Loading ...
Loading ...
Loading ...
Folding down the middle head
restraint
To improve the view to the rear, the center head
restraint can be folded to the rear. Only push the
head restraint down if no one will be sitting in the
center seat.
▷ To the rear: press the button, arrow 1, and
fold the head restraint backward.
▷ Forward: fold the head restraint toward the
front as far as it will go. Make sure that the
head restraint engages correctly.
Adjusting the height
The height of the head restraints cannot be ad‐
justed.
Removing
Only remove the head restraint if no one will be
sitting in the seat in question.
1.
Fold down the rear seat backrest, refer to
page 262, in question.
2. Raise the head restraint up against the resist‐
ance.
3. Press the button, arrow 1, and pull the head
restraint out completely.
Installing
Proceed in the reverse order to install the head
restraint.
After mounting, slide the head restraint up or
down slightly, making sure the head restraint en‐
gages properly.
Mirrors
Exterior mirrors
General information
The mirror on the front passenger side is more
curved than the driver's side mirror.
The mirror setting is stored for the driver profile
currently in use. When the vehicle is unlocked via
the remote control, the position is automatically
retrieved if the function, refer to page 96, is acti‐
vated for this purpose.
The current exterior mirror position can be stored
using the memory function, refer to page 112.
Safety information
Warning
Objects reflected in the mirror are closer than
they appear. The distance to the traffic behind
could be incorrectly estimated, for instance
while changing lanes. There is a risk of acci‐
dent. Estimate the distance to the traffic behind
by looking over your shoulder.
Seite 109
Seats, mirrors, and steering wheel
CONTROLS
109
Online Edition for Part no. 01402720839 - II/19
Loading ...
Loading ...
Loading ...