Loading ...
Loading ...
Loading ...
Parking aid lines
Pathway lines
Pathway lines help you to estimate the space re‐
quired when parking and maneuvering on level
roads.
Pathway lines depend on the steering angle and
are continuously adjusted to the steering wheel
movements.
Turning radius lines
Turning radius lines can only be superimposed
on the camera image together with pathway
lines.
Turning radius lines show the course of the
smallest possible turning radius on a level road.
Only one turning radius line is displayed after the
steering wheel is turned past a certain angle.
Parking using pathway and turning radius
lines
1.
Position the vehicle so that the red turning ra‐
dius line leads to within the limits of the park‐
ing space.
2. Turn the steering wheel to the point where
the green pathway line covers the corre‐
sponding turning radius line.
Obstacle marking
Depending on the vehicle equipment, obstacles
behind the vehicle are detected by the PDC Park
Distance Control sensors.
Obstacle markings can be faded into the image
of the rearview camera.
The colored thresholds of the obstacle markings
match the markings of the PDC Park Distance
Control.
Setting brightness and contrast
via iDrive
With the rearview camera switched on:
1.
Move the Controller to the left.
2.
▷ "Brightness"
▷ "Contrast"
3. Set the desired value.
System limits
Deactivated camera
If the camera is deactivated, for instance if the
tailgate is open, the camera image is displayed
hatched in gray.
Detection of objects
Very low obstacles as well as high, protruding
objects such as ledges may not be detected by
the system.
Seite 216
CONTROLS
Driver assistance systems
216
Online Edition for Part no. 01402720839 - II/19
Loading ...
Loading ...
Loading ...