User Manual - Page 90

For 2019 DURANGO.

Loading ...
Loading ...
Loading ...
in the different color graphic display and an
“Inflate to XX” message will be displayed. After
driving the vehicle for up to 20 minutes above
15 mph (24 km/h), the Tire Pressure Monitoring
System Warning Light will flash on and off for
75 seconds and then remain on solid. In addi-
tion, the instrument cluster display will display
a “SERVICE TPM SYSTEM" message for five
seconds and then display dashes (- -) in place of
the pressure value. For each subsequent igni-
tion switch cycle, a chime will sound, the Tire
Pressure Monitoring System Warning Light will
flash on and off for 75 seconds and then remain
on solid, and the instrument cluster display will
display a "SERVICE TPM SYSTEM" message for
five seconds and then display dashes (- -) in
place of the pressure value. Once you repair or
replace the original road tire, and reinstall it on
the vehicle in place of the spare tire, the TPMS
will update automatically.
In addition, the Tire Pressure Monitoring Sys-
tem W arning Light will turn off and the graphic
in the instrument cluster display will display a
new pressure value instead of dashes (- -), as
long as no tire pressure is below the low-
pressure warning limit in any of the four active
road tires. The vehicle may need to be driven for
up to 20 minutes above 15 mph (24 km/h) in
order for the TPMS to receive this information.
TPMS Deactivation If Equipped
The Tire Pressure Monitoring System (TPMS)
can be deactivated if replacing all four wheel
and tire assemblies (road tires) with wheel and
tire assemblies that do not have TPMS Sensors,
such as when installing winter wheel and tire
assemblies on your vehicle.
To deactivate the TPMS, first, replace all four
wheel and tire assemblies (road tires) with tires
not equipped with Tire Pressure Monitoring
(TPM) Sensors. Then, drive the vehicle for
20 minutes above 15 mph (24 km/h). The
TPMS will chime, the TPMS Warning Light will
flash on and off for 75 seconds and then remain
on. The instrument cluster will display the
“SERVICE TPM SYSTEM” message and then
display dashes (--) in place of the pressure
values.
Beginning with the next ignition cycle, the
TPMS will no longer chime or display the “SER-
VICE TPM SYSTEM” message in the instru-
ment cluster but dashes (--) will remain in place
of the pressure values.
To reactivate the TPMS, replace all four wheel
and tire assemblies (road tires) with tires
equipped with TPM sensors. Then, drive the
vehicle for up to 20 minutes above 15 mph
(24 km/h). The TPMS will chime, the TPMS
W arning Light will flash on and off for 75 sec-
onds and then turn off. The instrument cluster
will display the “SERVICE TPM SYSTEM” mes-
sage and then display pressure values in place
of the dashes. On the next ignition cycle the
"SERVICE TPM SYSTEM" message will no lon-
ger be displayed as long as no system fault
exists.
SAFETY
88
Loading ...
Loading ...
Loading ...