Loading ...
Loading ...
Loading ...
1. Look behind the seating position where you
plan to install the child restraint to find the
tether anchorage. Y ou may need to move the
seat forward to provide better access to the
tether anchorage. If there is no top tether
anchorage for that seating position, move
the child restraint to another position in the
vehicle if one is available.
2. To access the top tether strap anchorages
behind the rear seat, pull the carpeted floor
panel away from the seat back, this will
expose the top tether strap anchorages.
3. Route the tether strap to provide the most
direct path for the strap between the anchor
and the child seat. If your vehicle is
equipped with adjustable rear head re-
straints, raise the head restraint, and where
possible, route the tether strap under the
head restraint and between the two posts. If
not possible, lower the head restraint and
pass the tether strap around the outboard
side of the head restraint.
Pulling Down The Carpet Floor Panel To
Access Top Tether Strap Anchorage
Third Row Top Tether Strap Anchorage
(Located On Seatback)
SAFETY
124
Loading ...
Loading ...
Loading ...