Loading ...
Loading ...
Loading ...
To Activate
Push the on/off button to activate the Speed
Control. “CRUISE CONTROL READY” will ap-
pear in the instrument cluster display to indi-
cate the Speed Control is on. To turn the system
off, push the on/off button a second time.
“CRUISE CONTROL OFF” will appear in the
instrument cluster display to indicate the Speed
Control is off. The system should be turned off
when not in use.
WARNING!
Leaving the Speed Control system on when
not in use is dangerous. Y ou could acciden-
tally set the system or cause it to go faster
than you want. You could lose control and
have an accident. Always leave the system
OFF when you are not using it.
To Set A Desired Speed
Turn the Speed Control on. When the vehicle
has reached the desired speed, push the SET
(+) or SET (-) button and release. Release the
accelerator and the vehicle will operate at the
selected speed. Once a speed has been set, a
message “CRUISE CONTROL SET TO MPH
(km/h)” will appear indicating what speed was
set. A cruise indicator lamp, along with set
speed will also appear and stay on in the instru-
ment cluster when the speed is set.
To Resume Speed
To resume a previously set speed, push the RES
button and release. Resume can be used at any
speed above 20 mph (32 km/h).
To Deactivate
A soft tap on the brake pedal, pushing the CANC
button, or normal brake pressure while slowing
the vehicle will deactivate the Speed Control
without erasing the set speed from memory.
Pushing the on/off button or turning the ignition
switch OFF erases the set speed from memory.
ADAPTIVE CRUISE CONTROL (ACC)
— IF EQUIPPED
If your vehicle is equipped with Adaptive Cruise
Control, the controls operate exactly the same
as Speed Control with only a couple of differ-
Adaptive Cruise Switches
1—
Adaptive Cruise Control (ACC) On/Off
2 — Distance Setting – Decrease
3 — Distance Setting – Increase
147
Loading ...
Loading ...
Loading ...