Loading ...
Loading ...
Loading ...
Refer to “Instrument Cluster Display” in “Get-
ting To Know Your Instrument Panel” in your
Owner’s Manual for further information.
NOTE:
When ParkSense is disabled and the gear selec-
tor is moved to the DRIVE position, no warning
message will be displayed.
The ParkSense switch LED will be on when
ParkSense is disabled or requires service. The
ParkSense switch LED will be off when the
system is enabled. If the ParkSense switch is
pushed, and the system requires service, the
ParkSense switch LED will blink momentarily,
and then the LED will be on.
Operation With A Trailer
For vehicles equipped with an Integrated Trailer
Brake Module (ITBM), the operation of the rear
sensors is automatically deactivated when the
trailer's electric plug is inserted in the vehicle's
tow hook socket. The front system is still func-
tional, and the arcs will be overlaid with a
"Trailer" message. The rear sensors are auto-
matically reactivated when the trailer's cable
plug is removed.
When the vehicle is connected to a trailer , the
instrument cluster display will show the "Rear
ParkSense Unavailable Trailer Connected" mes-
sage in the following situations:
• For five seconds at vehicle start up
• For five seconds when the ParkSense button
is pushed, as long as an object is not detected
in the front
• As long as the vehicle is in REVERSE (vehicle
graphic displayed with a trailer overlay)
NOTE:
Refer to “Towing Requirements” in “Starting
And Operating” in your Owner’s Manual for
more information on the Integrated Trailer
Brake Module.
LANESENSE — IF EQUIPPED
LaneSense Operation
The LaneSense system is operational at speeds
above 37 mph (60 km/h) and below 112 mph
(180 km/h). The LaneSense system uses a
forward looking camera to detect lane markings
and measure vehicle position within the lane
boundaries.
When both lane markings are detected and the
driver unintentionally drifts out of the lane (no
turn signal applied), the LaneSense system pro-
vides a haptic warning in the form of torque
applied to the steering wheel to prompt the
driver to remain within the lane boundaries. If
the driver continues to unintentionally drift out
of the lane, the LaneSense system provides a
visual warning through the instrument cluster
display to prompt the driver to remain within the
lane boundaries.
The driver may manually override the haptic
warning by applying torque into the steering
wheel at any time.
When only a single lane marking is detected and
the driver unintentionally drifts across the lane
marking (no turn signal applied), the Lane-
Sense system provides visual warnings through
the instrument cluster display to prompt the
driver to remain within the lane. When only a
single lane marking is detected, a haptic
(torque) warning will not be provided.
NOTE:
When operating conditions have been met, the
LaneSense system will monitor if the driver’ s
STARTING AND OPERATING
154
Loading ...
Loading ...
Loading ...