Loading ...
Loading ...
Loading ...
IGNITION SWITCH
Keyless Push Button Ignition
This feature allows the driver to operate the
ignition with the push of a button, as long as the
key fob is in the passenger compartment.
The Keyless Push Button Ignition has three
operating modes which are labeled and will
illuminate when in position. The three modes
are OFF, ACC, and ON/RUN.
NOTE:
In case the ignition switch does not change with
the push of a button, the key fob may have a low
or dead battery. In this situation, a back up
method can be used to operate the ignition
switch. Put the nose side of the key fob (side
opposite of the Emergency Key) against the
ENGINE START/STOP button and push to op-
erate the ignition switch.
Dead Key Fob Battery
Key Not Detected Feature
If the ignition position does not change with a
push of the ignition button, and the instrument
cluster display message “Key Fob Not De-
tected” is being displayed, the key fob may have
a low or dead battery. In this situation, a back up
method can be used to operate the keyless push
button ignition. Put the nose side (side opposite
of the emergency key) of the key fob against the
keyless ignition push button and push to oper-
ate the ignition. Once the starter engages and
the engine starts remove the key fob from the
keyless ignition push button.
REMOTE START — IF EQUIPPED
How To Use Remote Start
This system uses the key fob to start the engine
conveniently from outside the vehicle while still
maintaining security. The system has a range of
approximately 300 ft (91 m).
Keyless Push Button Ignition
Low Or Dead Key Fob Battery Starting
Procedure
GETTING TO KNOW YOUR VEHICLE
14
Loading ...
Loading ...
Loading ...