Loading ...
Loading ...
Loading ...
18
CONTROL PANEL
To avoid damage to the control panel, do not use abrasive
cleaners, steel-wool pads, gritty washcloths or abrasive paper
towels.
Cleaning Method:
■ Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on
panel.
■ affresh™ Kitchen and Appliance Cleaner Part Number
W10355010B (not included):
See “Assistance or Service” section to order.
OVEN CAVITY
■ Food spills should be cleaned when oven cools. To avoid
buildup of baked-on food residue, clean the oven cavity after
every use.
■ With long cooking times or when cooking on different levels,
especially food with a high water content (pizzas, stuffed
vegetables, etc.) moisture may form on the inside of the door
and the seal. When the oven is cool, dry the inside of the door
with a cloth or sponge.
■ Clean the glass of the door with a suitable liquid detergent.
■ For easier cleaning, the oven door may be removed. See the
Installation Instructions.
To clean oven cavity surfaces:
To avoid damage to oven cavity surfaces, do not use soap-filled
scouring pads or abrasive cleaners.
Cleaning Method:
■ To clean the oven cavity surfaces, remove the rack guides.
See the “Rack Guides” section.
■ Use oven cleaner and follow product label instructions.
ACCESSORIES
Cleaning Method:
■ Soak the accessories in water with liquid detergent
immediately after use, handling them with oven mitts if still
hot.
■ Food residue can be easily removed using a brush or sponge.
Rack Guides
To Remove Rack Guides
Remove the rack guides by lifting then pulling them out as shown
in the following illustration.
Oven Light
The oven light is a 240-volt, 20 to 40-watt maximum, type G9
T300°C halogen bulb.
The oven light will come on when the oven door is opened. When
the oven door is closed, turn the Oven Control knob to the Lamp
symbol then turn the Browse knob to On.
To Replace the Oven Light:
Before replacing the bulb, make sure the oven is off and cool.
1. Disconnect power.
2. Turn the glass light cover counterclockwise to remove.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb using a tissue or wearing cotton gloves to
handle bulb. To avoid damage or decreasing the life of the
new bulb, do not touch bulb with bare fingers. Turn bulb
clockwise.
5. Replace glass light cover by turning clockwise.
6. Reconnect power.
Loading ...
Loading ...
Loading ...