Loading ...
Loading ...
Loading ...
Fuses and bulbs
CAUTION
Take care when removing the rear light unit
to mak
e sure there is no damage to the
paintwork or any of its components.
Note
●
Make sur
e you have a soft cloth ready to
place under the glass on the rear light unit,
to avoid any scratches.
●
For LED lights, you can only change the
turn signal and reverse light bulbs.
Tail lights bulbs located in the rear
lid
Fig. 59
Rear lid open: remove the cover.
Fig. 60 Remove the bulb holder.
Follow the steps indicated:
–
Check which of the bulbs is defective.
–
Open the rear lid.
–
Remove the rear lid cover in the direction
indicat
ed
›
››
Fig. 59.
–
Remove the bulb connector
›››
Fig. 60
1
.
–
Remove the bulb holder unlocking the re-
t
aining t
abs
A
.
–
Change the damaged bulb.
–
Use a cloth to remove any fingerprints from
the gl
ass part of the bulb
.
–
Check that the new bulb works properly.
–
Carry out the same actions in reverse order
for assembly and pay special attention to
placing the bulb holder, ensuring that the
tabs are properly secured.
Note
For LED lights, you can only change the turn
signal and re
verse light bulbs.
Number plate light
Note
Number plate lights use LED technology.
LEDs have an estimat
ed life that exceeds
than that of the car. If a light with LEDs fails,
go to an authorised workshop for replace-
ment.
Side turn signals
Fig. 61
Turn signal integrated in the rear view
mirr
or
The side turn signals are LEDS and are inte-
gr
at
ed in the rear view mirrors.
»
63
Loading ...
Loading ...
Loading ...