Loading ...
Loading ...
Loading ...
Fuses and bulbs
Dipped beam headlight bulb
Fig. 52
In the engine compartment: remove
the co
v
er.
Fig. 53 In the engine compartment: dipped
beam headlight bulb
.
–
R
aise the bonnet.
–
Mo
ve the loop
›››
Fig. 52
1
in the direction
of the arr
o
w and remove the cover.
–
Remove the bulb connector
›››
Fig. 53
2
.
–
Unclip the retainer spring
›
›
›
Fig. 53
3
pressing inwards to the right.
–
Extract the bulb and fit the replacement so
that the lug on the base fits int
o the r
ecess
on the reflector.
–
Fit the connector.
–
Fit the cover and close the strap. Make sure
that the gasket sits well on the casing cover
during the operation.
–
Check whether the new bulb is working.
Turn signal and DRL/side light
(daytime running light)
1)
Fig. 54
In the engine compartment: turn signal
light bulb
1
and DRL (daytime running light)
bulb
2
.
–
Raise the bonnet.
–
Turn the bulb holder
›
›
›
Fig. 54
1
or
2
to
the l
eft and pull.
–
R
emove the bulb by pressing on the bulb
holder and turning it anticlockwise at the
same time.
–
Installation involves all of the above steps in
reverse sequence.
1)
In headlight versions with LED DRL, this light
source cannot be r
eplaced. It is designed to last
the length of the vehicle’s service life. In case of
failure, go to an authorised workshop to have it
replaced.
61
Loading ...
Loading ...
Loading ...