Loading ...
Loading ...
Loading ...
Driving
It lights up green
a)
ACC connected, vehicle detected in front.
a)
It lights up white on the analogue instrument clus-
ter
.
When the ACC is in standby, the indicator
lamps light up grey.
Setting speed
To set the speed, move the third lever up or
down to the desired speed
›››
Fig. 159. The
speed is adjusted at intervals of 10 km/h (5
mph).
When the ACC is active, the lever can be
moved to position
›››
Fig. 158
2
to in-
cr
ease the desir
ed speed by 1 km/h (1 mph).
You can then press to decrease it by 1
km/h (1 mph).
Setting your distance level
The distance can be set to one of five levels,
from very short to very long:
●
Move button
A
›
›
›
Fig. 159 right or left to
increase or decrease the distance.
Keep in mind each country’s regulations on
minimum braking distances.
Suspend regulation (standby)
●
Move the third lever to position
›››
Fig. 158
3
or press the brake pedal.
The ACC indicator lamp is grey; the speed
and dist
ance ar
e saved.
If the ESC or ASR is disconnected
›››
page 237, the ACC is automatically sus-
pended.
Reinstating the cruise control
●
Move the third lever to the position to
use the last set speed and distance,
●
OR: Press the button to use the current
speed.
Switching off
●
Move the lever to the (fixed)
0
position.
The set speed is cl
ear
ed.
Exceeding the speed regulated by the
ACC
While driving with the ACC switched on, the
driver can increase speed by pressing the
accelerator pedal. ACC regulation is suspen-
ded until you release the accelerator pedal
›››
.
Adjusting the def
ault dist
ance level at the
start of your journey
In the Infotainment system, you can pre-se-
lect the distance level when connecting the
ACC from:
●
Very short, Short, Medium, Long and Very
long using the Infotainment system: > Driv-
er assistance > ACC
›››
page 90.
Changing the driving profile
In vehicles with SEAT Drive Profile, the driving
profile selected can have an influence on the
ACC’s acceleration and braking behaviour
›››
page 206.
In vehicles without SEAT Drive Profile, the be-
haviour of the ACC can also be affected if
any of the following drive profiles are selec-
ted in the infotainment system in Drive assist.
ACC settings will be the same as those in the
SEAT Drive Profile.
WARNING
Before driving off, check that the road is
clear
. The radar sensor may not detect ob-
stacles on the road. This could cause an
accident and serious injuries. If necessary,
apply the brake.
CAUTION
If you increase speed using the accelerator
pedal, the ACC may not be able t
o safely
adjust the speed of the distance due to the
limitations of the system.
●
Be prepared to react if required by the
situation.
224
Loading ...
Loading ...
Loading ...