User Manual - Page 425

For 2019 Prius Prime.

Loading ...
Loading ...
Loading ...
PRIUS PRIME_OM_OM47D13U_(U)
423
5-5. Using the driving support systems
5
Driving
Conditions under which the Blind Spot Monitor function may not func-
tion correctly
The Blind Spot Monitor function may not detect vehicles correctly in the fol-
lowing situations:
When the sensor is misaligned due to a strong impact to the sensor or its
surrounding area
When mud, snow, ice, a sticker, etc. is covering the sensor or surround-
ing area on the rear bumper
When driving on a road surface that is wet with standing water during bad
weather, such as heavy rain, snow, or fog
When multiple vehicles are approaching with only a small gap between
each vehicle
When the distance between your vehicle and a following vehicle is short
When there is a significant difference in speed between your vehicle and
the vehicle that enters the detection area
When the difference in speed between your vehicle and another vehicle
is changing
When a vehicle enters a detection area traveling at about the same
speed as your vehicle
As your vehicle starts from a stop, a vehicle remains in the detection area
When driving up and down consecutive steep inclines, such as hills, dips
in the road, etc.
When driving on roads with sharp bends, consecutive curves, or uneven
surfaces
When vehicle lanes are wide, or when driving on the edge of a lane, and
the vehicle in an adjacent lane is far away from your vehicle
When a bicycle carrier or other accessory is installed to the rear of the
vehicle
When there is a significant difference in height between your vehicle and
the vehicle that enters the detection area
Immediately after the Blind Spot Monitor main switch is turned on
Instances of the Blind Spot Monitor function unnecessarily detecting a vehi-
cle and/or object may increase in the following situations:
When the sensor is misaligned due to a strong impact to the sensor or its
surrounding area
When the distance between your vehicle and a guardrail, wall, etc. that
enters the detection area is short
When driving up and down consecutive steep inclines, such as hills, dips
in the road, etc.
When vehicle lanes are narrow, or when driving on the edge of a lane,
and a vehicle traveling in a lane other than the adjacent lanes enters the
detection area
When driving on roads with sharp bends, consecutive curves, or uneven
surfaces
When the tires are slipping or spinning
When the distance between your vehicle and a following vehicle is short
When a bicycle carrier or other accessory is installed to the rear of the
vehicle
Loading ...
Loading ...
Loading ...