Loading ...
Loading ...
Loading ...
178
PRIUS PRIME_OM_OM47D13U_(U)
2-2. Charging
The error warning indicator on the CCID (Charging Circuit Interrupting
Device) flashes.
Electrical leakage detection function
or self- diagnostic function operates
and power is cut off
When the voltage is insufficient, the
error warning indicator may flash
when there is noise interference.
Perform a reset and connect to a
proper power source. (P. 116 )
If charging does not start, immedi-
ately stop charging and contact your
Toyota dealer.
Charging indicator does not illuminate, even though charging connector
is connected.
The plug is not properly connected
to the outlet
Check whether the plug is properly
connected to the outlet.
Charging connector is not securely
connected to charging inlet
Check the connection status of the
charging connector.
• When connecting the charging
connector, make sure not to touch
the latch release button. Insert the
charging connector securely until
you hear a click. The charging
connector may not be connected
correctly if the latch release button
is pressed while inserting.
• After connecting the charging con-
nector, check that the latch
release button is not pressed and
the charging indicator is turned on.
If the charging indicator does not
illuminate, even though the charging
connector is securely connected,
there may be a malfunction in the
system. Immediately stop charging
and contact your Toyota dealer.
Hybrid battery (traction battery) is
already fully charged
When the hybrid battery (traction
battery) is fully charged, charging is
not performed.
The charging equipment does not
operate
Please contact the facility manager
when there is a problem with
charging equipment.
Likely cause Correction procedure
Loading ...
Loading ...
Loading ...