Loading ...
Loading ...
Loading ...
7 Trouble-shooting
7.3 Unsatisfactory washing results
Problem Solution
The dishes are not
clean.
▸ Select a more powerful programme.
▸ Load the baskets differently, avoiding blind spots.
▸ Clean the filter system and re-insert correctly.
▸ Check to see whether the spray arms are clogged or dirty.
▸ Use the correct amount of detergent or use a different kind of deter-
gent.
▸ Check the water hardness setting.
▸ Refill the salt reservoir with regeneration salt.
There is a white
film on the dishes.
▸ Clean the appliance with dishwasher cleaner.
▸ Refill the salt reservoir with regeneration salt and run the Pre-rinsing
programme without dishes.
▸ Use the correct amount of detergent or use a different kind of deter-
gent.
▸ Refill the rinse agent.
▸ Increase the rinse agent dosage setting.
▸ Check the water hardness setting.
▸ If not using detergent, set to
All in 1 ON
in the user
settings.
There are streaks
or milky spots on
the dishes.
▸ Reduce the rinse agent dosage setting.
▸ If not using detergent, set to
All in 1 OFF
in the user set-
tings.
The dishes are wet
and dull or have
water marks on
them.
▸ Refill the rinse agent.
▸ Increase the rinse agent dosage setting.
▸ Use a different rinse agent.
▸ Do not open the appliance door until the end of the programme
when a triple acoustic signal is emitted and the display or function
light goes out (depending on model).
▸ If not using detergent, set to
All in 1 OFF
in the user
settings.
There are rust
spots on the items
being washed.
The rust stems from another source e.g. the cutlery, pans, water pipe.
The appliance is made of rust-free steel.
▸ Refill the salt reservoir with regeneration salt and run the «Pre-rins-
ing» programme without dishes.
The detergent is
not fully dissolved.
▸ Check to see whether the spray arms are clogged or dirty.
▸ Use a different kind of detergent.
▸ Check the detergent dispenser cover.
▸ Check whether the filter system is clogged.
38
Loading ...
Loading ...
Loading ...