Loading ...
Loading ...
Loading ...
3 Programme overview
Pre-rinsing: Prevents dirt drying on if the wash programme is not going to be
started until later.
3.2 Additional functions
Depending on the user settings, select between two functions.
1 ×
Energy saving: The wash temperature is reduced by 5 °C, lowering en-
ergy consumption by about 10 %. Gentle on glasses. The programme
time is shortened slightly.
Appliances with a heat pump: overall energy consumption is reduced by
up to 30 %, however the programme time is extended.
2 ×
OptiStart: If the «OptiStart» user setting is active, a delayed start is set.
During the delayed start, the dishes are soaked and this improves the
cleaning results and reduces the energy consumption.
SteamFinish: During rinsing, steam is generated, which settles on the
glasses and leads to optimum drying results. The programme takes around
15 minutes longer.
Partial load: For a small load of dishes. The amount of water used is re-
duced by up to 6l and the duration of the programme is shortened by up to
36minutes. Depending on the programme selected and the electrical con-
nection, the time saving may be less than 36 minutes.
Delayed start: Allows you to wash during off-peak hours (e.g. at off-peak
electricity rates). A delayed start of between 30 minutes and 24hours can
be set.
3.3 EcoManagement
Only active if «EcoManagement» is turned on in the user settings.
EcoManagement provides information on the energy and water consump-
tion of the appliance and supports the sustainable use of energy. The fol-
lowing consumption information can only be retrieved when no pro-
gramme is running:
Energy and water consumption of the last programme
Total energy and water consumption
Average energy and water consumption of the last 25 programmes
The energy and water consumption of a programme is displayed during
programme selection. At the end of a programme, the energy and water
consumption of the last programme run is displayed.
The values can vary according to programme, load, additional functions and
user settings.
12
Loading ...
Loading ...
Loading ...