Loading ...
Loading ...
Loading ...
6 Care and maintenance
6.2 Cleaning the spray arms
Upper spray arm
▸ Remove the upper basket.
1
2
▸ Release bayonet fastener 1 in an anti-clockwise direction and
remove.
▸ Remove the spray arm 2 from the shaft and rinse well under
running water.
▸ Check the nozzles.
Lower spray arm
▸ Hold the spray arm 3 in the middle and pull hard upwards.
3
▸ Rinse the spray arm well under running water.
▸ Check the nozzles.
▸ Clean the filter system and the coarse filter at the same time.
6.3 Cleaning the filter system
Only use soft materials for cleaning beneath the filter system. Never use metal ob-
jects.
An incorrectly assembled filter system can cause the appliance to malfunction.
▸ Open the appliance door and pull out the lower basket.
2
1
3
1
▸ Release the filter system in fine filter 1 in an anti-clockwise dir-
ection and remove.
▸ Open the coarse filer 2 by pressing on closing lug 3 and
clean the filter system under running water using a brush.
▸ Remove any coarse debris.
▸ Replace the filter system and turn the fine filter 1 as far as it
will go in a clockwise direction.
6.4 Refilling with regeneration salt
Never put detergent in the salt reservoir.
When the supply of regeneration salt is used up, the refill indicator flashes and
Refill salt
appears in the display.
▸ Open the appliance door and remove the lower basket.
▸ Open the cover on the salt reservoir by lifting up the grip.
33
Loading ...
Loading ...
Loading ...