Loading ...
Loading ...
Loading ...
6 Care and maintenance
5.23 Automatic standby
Factory setting: ON
Possible settings:
▪ OFF
▪ ON
If the user setting is turned on, the in-
formation in the display goes out at the
end of the programme.
If the user setting is turned off, the in-
formation can be displayed by operating
the appliance door. Afterwards press any
button and the display goes out.
5.24 Factory setting
Factory setting: NO
Possible settings:
▪ YES
▪ NO
With «YES», the factory settings can be
restored.
6 Care and maintenance
6.1 Cleaning the interior and exterior
Cleaning the interior
Using the correct dosage of detergent will automatically clean the interior of the appliance.
The appliance should be additionally cleaned twice a year with dishwasher cleaner.
▸ Follow the instructions for the dishwasher cleaner.
▸ Select the «Machine care» programme, because dishwasher cleaners require higher tem-
peratures for optimum cleaning effect.
Cleaning the exterior
▸ Do not use abrasive or caustic cleaning agents.
▸ Do not use scouring pads, steel wool, etc. Otherwise the surface will be damaged.
▸ Remove any soiling or excess cleaning solution immediately. Only use washing-up liquid or
glass cleaner.
▸ Clean the surfaces with a soft, damp cloth only – for metal surfaces rub in the direction of
the polish lines.
▸ Clean the operating panel with a damp cloth and then wipe dry. Only use washing-up liquid
or glass cleaner.
▸ Regularly clean the door seal and edges with a soft, damp cloth.
32
Loading ...
Loading ...
Loading ...