Loading ...
Loading ...
Loading ...
5 User settings
5.8 Rinse agent dosage
Factory setting: AUTOMATIC
Possible settings:
▪ AUTOMATIC
▪ OFF
▪ 1...2...12
The rinse agent dosage is automatically
adjusted to the load and the water hard-
ness. If the drying result is unsatisfactory,
the dosage can be set manually to one
of 12 levels.
5.9 Water hardness unit
Factory setting: °fH
Possible settings:
▪ °dH
▪ °fH
The unit of water hardness can be set to
the French degree of water hardness
(°fH) or the German degree of water
hardness (°dH).
5.10 DryPlus
Factory setting: OFF
Possible settings:
▪ OFF
▪ ON
If DryPlus is turned on, the drying tem-
perature is increased. This extends the
drying time.
5.11 RinsePlus
Factory setting: OFF
Possible settings:
▪ OFF
▪ ON
If RinsePlus is turned on, the amount of
water used with each programme is in-
creased. This extends the programme
time.
5.12 Hot water connection
Factory setting: NO
Possible settings:
▪ NO
▪ YES
▪ NO HEATING
If the appliance has a hot water connec-
tion, optimum use is made of the hot wa-
ter available.
«NO HEATING» setting: only enable if the
temperature of the inlet water is at least
60 °C. The dishes may not be com-
pletely dry by the end of the programme.
Leave the dishes in the appliance (e.g.
overnight) to dry.
29
Loading ...
Loading ...
Loading ...