Loading ...
Loading ...
Loading ...
6-22 In case of emergency
CAUTION
The connector must be fastened
securely. Not doing so may result in
damage to the connector due to
interference with other parts.
SCE0961
4. Remove the 4 bolts that secure the
4WD shift motor using the wrench
that is equipped in the vehicle.
5. Remove the 4WD shift motor assem-
bly.
CAUTION
Be careful not to allow the assembly
to contact water, dirt or sand.
SCE0962
6. Completely insert the wrench into the
internal gear
of the transfer.
7. Fully turn the wrench clockwise
as
far as it will go. This shifts the transfer
to the 4L position.
8. Install the 4WD shift motor assembly.
Securely tighten the 4 bolts using the
wrench.
CAUTION
. Do not connect the harness con-
nector of the 4WD shift motor
after the above procedure has
been performed.
Loading ...
Loading ...
Loading ...