Loading ...
Loading ...
Loading ...
6-6 In case of emergency
JVE0423X
5. Securely screw to connect the T-
shaped end of the jack rod and the
extension bar
as illustrated.
6. Fit the square end of the jack rod into
the square hole of the wheel nut
wrench to form a handle
.
7. Locate the oval opening above the
middle of the rear bumper.
8. Place the T-shaped end of the jack rod
through the opening and direct it
towards the spare wheel winch as-
sembly, located directly above the
spare wheel.
SCE0916
CAUTION
Do not insert the jack rod straight as
it is designed to be inserted at an
angle as shown.
9. Seat the T-shaped end of the jack rod
into the T-shaped opening of the
spare wheel winch. Apply pressure to
keep the jack rod engaged in the
spare wheel winch and turn the jack
rod counterclockwise to lower the
spare wheel.
Loading ...
Loading ...
Loading ...