Loading ...
Loading ...
Loading ...
SCE0876
2. Loosen each wheel nut one or two
turns by turning counterclockwise
with the wheel nut wrench. Do not
remove the wheel nuts until the tire
is off the ground.
NCE130
3. Install the assembled jack rod into the
jack as shown.
4. Carefully raise the vehicle until the
clearance between the tire and
ground is achieved.
5. To lift the vehicle, securely hold the
jack lever and rod with both hands
and turn the jack lever.
NOTE:
Before jacking up the vehicle, make
sure the ignition switch is placed in
the OFF position. If the vehicle is lifted
up with the engine running, the auto-
leveling suspension will become dis-
abled after 120 seconds. To reset the
auto-leveling suspension, cycle the
In case of emergency 6-9
Loading ...
Loading ...
Loading ...