Loading ...
Loading ...
Loading ...
2-62 Instruments and controls
JVI1517X
3. Install the rear bumper cover.
.
Place the cover over the surface
with the tag facing down.
.
Attach the hooks to the luggage
hooks
.
.
Secure the strap to the liftgate
striker
.
4. Cover the upper part of the rear
bumper as shown.
After loading or unloading the cargo, be
sure to remove the rear bumper cover
and store it in the storage place.
WARNING
. Never install the rear bumper
cover while the engine is running.
The exhaust gas could heat the
rear bumper cover and this may
cause a fire.
. Never drive with the rear bumper
cover left in place. There is a risk
that the liftgate will not close
correctly, and that carbon mon-
oxide may enter the cabin caus-
ing serious injury or death.
CAUTION
. Failure to follow the instructions
below could result in damage to
the rear bumper cover.
— Do not close the liftgate with
the rear bumper cover in-
stalled.
— Do not strike or apply exces-
sive force to the rear bumper
cover.
— Keep the rear bumper cover
away from heat or fire.
— To clean the rear bumper cov-
er, use a soft cloth, dampened
with a mild solution of neutral
detergent. Never use benzine,
thinner or any similar chemi-
cal.
— Remove any solvent such as
oil or gasoline spilled on the
surface of the rear bumper
cover as soon as possible.
Loading ...
Loading ...
Loading ...