Loading ...
Loading ...
Loading ...
12
www.insigniaproducts.com
Using DVI (same as HDMI but requires a audio
connection)
To connect a cable or satellite box using DVI:
1 Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable box.
3 Connect an HDMI-DVI adapter (not included) to
one end of an HDMI cable (not included).
4 Connect the HDMI-DVI adapter to the DVI OUT
jack on the cable or satellite box, then connect
the other end of the cable to the HDMI 1 (DVI)
jack on the back of your TV.
5 Connect a 3.5 mm audio cable (not included) to
the DVI AUDIO IN jack on the back of your TV
and to the AUDIO OUT jack on the cable or
satellite box.
6 Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
7 Go through the setup wizard on page 19.
Using component video (better)
To connect a cable or satellite box using
component video:
1 Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable box.
3 Connect a component video cable (not
included) to the COMPONENT IN 1 or
COMPONENT IN 2 Y/VIDEO, P
B, and PR jacks on
the back of your TV and the component video
out jacks on the cable or satellite box.
4 Connect an audio cable (not included) to the L
and R AUDIO jacks on the back of your TV and
to the audio out jacks on the cable or satellite TV
box.
5 Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
6 Go through the setup wizard on page 19.
Note
A DVI device must be connected to the HDMI 1 (DVI)
jack. If you connect a DVI device to the HDMI 2 jack,
you will not hear audio.
Note
When you connect the audio using the DVI AUDIO
IN jack, the audio output is analog.
Back of TV
Cable/satellite box
HDMI cable with HDMI-DVI adapter
3.5 mm audio cable
Note
When you connect the audio using the L and R
AUDIO jacks, the audio output is analog.
You can connect the video to the COMPONENT IN 1
or COMPONENT IN 2 video jacks and connect the
audio to the DIGITAL AUDIO OUT jack to get digital
audio output.
Back of TV
Cable/satellite box
Component video cable
Audio cable
Cables are often
color-coded to match
color-coded jacks.
Loading ...
Loading ...
Loading ...