Loading ...
Loading ...
Loading ...
WHEELS AND TIRES
* Option/accessory, for more information, see Introduction.
488
Tools
Tools for e.g., changing wheels, etc. are located
under the cargo compartment floor.
The foam block under the cargo compartment
floor contains the towing eyelet, the tool for
removing plastic wheel bolt covers, the jack* and
the lug wrench*. There is also a storage space for
the tool used to remove locking wheel bolts.
Related information
•
Jack (p. 488)
•
Changing tires (p. 487)
Jack
The jack is used to raise the vehicle, for example
when mounting winter wheels, etc.
WARNING
•
The jack must correctly engage the jack
attachment.
•
Be sure the jack is on a firm, level, non-
slippery surface.
•
Never allow any part of your body to be
extended under a vehicle supported by a
jack.
•
Use the jack intended for the vehicle
when changing a tire. For any other job,
use stands to support the vehicle.
•
Apply the parking brake and put the gear
selector in the Park (P) position.
•
Block the wheels standing on the ground,
use rigid wooden blocks or large stones.
•
The jack should be kept well-greased and
clean, and should not be damaged.
•
No objects should be placed between the
base of jack and the ground, or between
the jack and the attachment bar on the
vehicle.
CAUTION
•
When not in use, the jack* should be kept
in its storage compartment under the
cargo compartment floor.
•
The jack provided with your vehicle is
intended to be used only in temporary sit-
uations such as changing wheels in the
event of a flat tire. Only the jack that
came with your particular model should
be used to lift the vehicle. If the vehicle
needs to be lifted more frequently or for a
prolonged period, using a garage jack or
hoist is recommended. Always follow this
device’s instructions for use.
Models with leveling control*
If the vehicle is equipped with the optional pneu-
matic suspension, this feature must be turned off
before raising the vehicle with the jack.
To do so, go to
Settings Vehicle
Deactivate Suspension & Leveling Control in
the center display's Top view.
Loading ...
Loading ...
Loading ...