Loading ...
Loading ...
Loading ...
INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction.
113
Auto-stop
The laminated panoramic roof has an auto-stop
feature that is triggered if the glass section of the
roof or the sun shade is blocked in any way when
being closed. In this case, the laminated panor-
amic roof or sun shade will stop and reverse
automatically approximately 2 in. (5 cm) from the
point at which it was blocked (or will open fully to
the tilt position).
The auto-stop feature also functions when the
laminated panoramic roof or sun shade is being
opened.
WARNING
For 10 minutes after the auto-stop function
has been triggered, it will not function again
the first time the control is moved in the same
direction as when the auto-stop function was
triggered.
The auto-stop feature can be overridden if the
closing procedure has been interrupted (e.g., due
to ice around the moonroof) by pressing and
holding the control forward/down until the moon-
roof is closed.
Power windows
All power windows can be operated using the
control panel in the driver's door. The control
panels in the other doors only operate the win-
dow in the respective doors.
Driver's door control panel
Switch for power child safety locks* and dis-
engaging rear power window buttons
Rear window controls
Front window controls
Related information
•
Operating the power windows (p. 113)
•
Child safety locks (p. 257)
Operating the power windows
WARNING
•
Always put the ignition in mode 0 and
remove the ignition key from the vehicle
when the vehicle is unattended
•
Never leave children unattended in the
vehicle.
•
Make sure that the windows are com-
pletely unobstructed before they are
operated.
Operating
Operating the power windows
Manual up/down
Auto up/down.
For the power windows to function, the ignition
must be in at least mode I. When the vehicle has
Loading ...
Loading ...
Loading ...