User Manual - Page 379

For 2017 XC90 T8 TWIN ENGINE PLUG-IN HYBRID.

Loading ...
Loading ...
Loading ...
STARTING AND DRIVING
}}
* Option/accessory, for more information, see Introduction.
377
kinetic energy into electricity that is used to
charge the hybrid battery. This is indicated in the
instrument panel, see also the article "General
information about the XC90 T8 Twin Engine
Plug-in Hybrid".
Battery charging gauge in the instrument panel
This function is active at speeds from approx.
90 mph (150 km/h) down to 3 mph (5 km/h).
When braking at speeds outside of this range or
during harder braking, the hydraulic brake system
is used.
Cleaning the brake discs
Coatings of dirt and water on the brake discs
may result in delayed brake function. This delay is
minimized by cleaning the brake linings.
Cleaning the brake pads is advisable in wet
weather, prior to long-term parking, and after the
vehicle has been washed. Do this by braking gen-
tly for a short period while the vehicle is moving.
Driving on wet or salted roads
Prolonged driving on wet or salted roads can
affect brake function and increase stopping dis-
tance. Be sure to keep a safe distance to the
vehicle ahead when driving under these condi-
tions.
Brake pad inspection
On vehicles equipped with a jack*, the condition
of the brake pads can be checked by raising the
vehicle and performing a visual inspection of the
brake pads.
WARNING
If the vehicle has been driven immediately
prior to a brake pad inspection, the wheel
hub, brake components, etc., will be very
hot. Allow time for these components to
cool before carrying out the inspection.
Apply the parking brake and put the gear
selector in the Park (P) position.
Block the wheels standing on the ground,
use rigid wooden blocks or large stones.
WARNING
Use the jack intended for the vehicle
when changing a tire. For any other job,
use stands to support the vehicle.
The jack should be kept well-greased and
clean, and should not be damaged.
Be sure the jack is on a firm, level, non-
slippery surface.
No objects should be placed between the
base of jack and the ground, or between
the jack and the attachment bar on the
vehicle.
The jack must correctly engage the jack
attachment.
Never allow any part of your body to be
extended under a vehicle supported by a
jack.
Loading ...
Loading ...
Loading ...