Loading ...
Loading ...
Loading ...
DRIVER SUPPORT
* Option/accessory, for more information, see Introduction.
273
Reactivating SL from standby mode
To reactivate SL after it has temporarily been put
in standby mode:
–
Press the button (1).
> The maximum speed marker (4) and sym-
bols will change colors to WHITE and the
vehicle's maximum speed will be limited to
the previously set maximum speed.
or
–
Press the button (2).
> The symbols will change colors from
GRAY to WHITE and the vehicle's current
speed will be set as the maximum speed.
Increasing the speed with the
accelerator pedal
The set maximum speed can be temporarily
exceeded using the accelerator pedal without
putting SL in standby mode, for instance when
quick acceleration is required.
1. Press the accelerator pedal as far down as
possible and release it when the vehicle has
reached the desired speed.
> SL remains activated (the symbols in the
instrument panel will remain WHITE).
2. Release the accelerator pedal when the tem-
porary acceleration is completed.
> The vehicle will slow down and its speed
will remain under the set maximum speed.
Related information
•
Speed limiter (SL)* (p. 267)
•
Starting and activating the Speed Limiter
(SL)* (p. 268)
Turning the Speed Limiter* off
The Speed Limiter (SL) can be turned off.
Function buttons and symbols
1.
Press the
button (2).
> SL will go into standby mode.
2.
Press the ◀ (1) or ▶ (3) buttons to select
another function.
> The SL symbol (4) in the instrument panel
will go out and the set maximum speed
will be erased from the system's memory.
3.
Press the
button (2) again.
> The newly selected function will be acti-
vated.
Related information
•
Speed limiter (SL)* (p. 267)
•
Starting and activating the Speed Limiter
(SL)* (p. 268)
Loading ...
Loading ...
Loading ...