Loading ...
Loading ...
Loading ...
INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction.
175
Rear seats
Your vehicle has three rows of seats. The sec-
ond row of seats has three individual seating
positions and the third row of seats has two indi-
vidual seating positions.
Related information
•
Adjusting the second row backrest tilt
(p. 177)
•
Adjusting the second row head restraints
(p. 175)
•
Folding the second row backrests (p. 178)
•
Folding the third row backrests (p. 180)
•
Getting into and out of the third row of seats
(p. 179)
•
Moving the second row seats forward/rear-
ward (p. 176)
•
Turning seat heating* on and off (p. 210)
Adjusting the second row head
restraints
The center head restraint in the second row of
seats can be adjusted to suit the height of the
seat's occupant. The outboard head restraints
can be folded down* for a better rear view.
Adjusting the center head restraint
The center head restraint should be adjusted up
or down according to the passenger's height. The
restraint should be carefully adjusted to support
the occupant's head.
The center rear seat head restraint should only
be in its lowest position when this seat is NOT
occupied. When the center seat is occupied, the
head restraint must be correctly adjusted to the
passenger’s height so that, if possible, the whole
of the back of the head is covered.
WARNING
The center rear seat head restraint should
only be in its lowest position when this seat is
NOT occupied. When the center seat is occu-
pied, the head restraint must be correctly
adjusted to the passenger’s height so that, if
possible, the entire back of the head is cov-
ered.
Center head restraint button
To lower the head restraint, press and hold the
button (see the illustration) and push the head
restraint down carefully.
Loading ...
Loading ...
Loading ...