Loading ...
Loading ...
Loading ...
31
TQBJ0981
4 Put up the wall mounting sheet on the wall where
the unit is to be mounted.
≥ Before deciding the location to place the unit, be sure to
check that the Wi-Fi signal strength is sufficient. (l 24)
≥ Spread out the wall mounting sheet when tapping it to
the wall.
5 Make holes on the wall at the center of each cross
mark on the sheet.
≥ Take the sheet away from the wall after its use.
6 Attach each wall mount bracket to the wall with two
screws (not supplied).
≥ Use a level to ensure both wall mount brackets are
level.
7 Attach the safety holder with two screws (not
supplied) to the wall.
8 Attach the unit.
1 Hook the unit securely onto the wall mount brackets
with both hands.
≥ Connect the antenna and the AC mains lead to the unit
before hanging the unit onto the wall. (l 6)
2 Slightly uplift the unit vertically until reaching the
hook of the safety holder, and push lower so that
the unit is hooked and locked in the safety holder.
≥
The unit will be locked onto the safety holder with a click sound.
≥ After hanging the unit, release your hands carefully to
confirm the unit sits securely on the wall mount brackets
and the safety holder.
9
Attach the fall prevention cord (not supplied) to the wall.
≥ Make sure that the slack of the cord is minimal.
∫
To release the unit from the safety holder
While pressing two catches of the safety holder, uplift
the unit vertically.
Wall mounting sheet
Adhesive tape (not supplied)
Wall
420 mm
102.5 mm
130.5 mm
141 mm
100 mm
118.5 mm
300 mm
100 mm
39 mm
73 mm
Space required
At least 30 mm
‰7.5 mm to
‰9.4 mm
‰4.0 mm
Wall mount bracket
At least 30 mm
‰7.5 mm to
‰9.4 mm
‰4.0 mm
Safety holder
Wall
AC mains lead
Wall
Hook
Wall mount bracket
Safety holder
Cord (not supplied)
Screw eye (not supplied)
Wall
Catches
SC-HC1020-EGEBGN~TQBJ0981.book 31 ページ ２０１７年１月２０日 金曜日 午前１０時３５分
Loading ...
Loading ...
Loading ...