Loading ...
Loading ...
Loading ...
Information
40
Lamp Replacement
Be careful when replacing lamp
The usable lifetime of the lamp depends on the environment it is used
in. You can see the amount of time the lamp has been used in the
CHECKING LAMP TIME section of the Menu (page.30). You must
replace the lamp when:
• The projected image gets darker or starts to deteriorate.
• The lamp indicator is red.
• The message “Replace the lamp” appears on the screen when
turning the projector on.
ꔈ Press the POWER button on the control panel or remote control to turn off power.
ꔈ If the operation indicator LED is orange and blinking, do not disconnect the main supply until the operation
indicator LED is lit up constantly (orange).
ꔈ Allow the lamp to cool for 1 hour before replacing it.
ꔈ Replace only with the same type lamp from an LG Electronics Service Center. Using another manufacturers
lamp may cause damage to the Projector and lamp.
ꔈ Pull out the lamp only when replacing the lamp.
ꔈ Keep the lamp unit out of reach of children. Keep the Lamp away from heat sources such as radiators, stoves
etc.
ꔈ To reduce the risk of fire do not expose the lamp to liquids or foreign materials.
ꔈ Do not place the lamp near any heat source.
ꔈ Make sure the new lamp is securely tightened with screws. If not, the image may be dark or there could be an
increased risk of fire.
ꔈ Never touch the lamp unit glass otherwise image quality may be compromised or lamp life maybe reduced.
To obtain a replacement Lamp unit
• Lamp model number is on page 43. Check the lamp model and then purchase it from an LG Electronics
Service Center.
• Using another manufacturers lamp may cause damage to the projector.
Lamp unit disposal
• Dispose of the used lamp by returning it to the LG Electronics Service Center.
<Front panel of the Projector>
Lamp indicators
Replacing the Lamp
Loading ...
Loading ...
Loading ...