Loading ...
Loading ...
Loading ...
Installing and Composition
15
Do not disconnect the power cord while the fan is in operation. If the power cord is disconnected while the fan is in operation, it may takes longer
to activate the lamp after turning on the power and the lifespan of the lamp may be shortened.
Turning on the Projector
Turning off the Projector
1. Connect power cord correctly.
2. Remove the lens cap. If it is left on, it could become deformed due to the heat produced by the projection lamp.
3. Press the POWER button on the remote control or top cover. (Green operation indicator flashes if lamp is in start-up
cycle.)
• An image will appear after the operation indicator light turns (Green).
• Select the source mode with the INPUT button.
1. Press the POWER button on the top cover or remote control.
2. Press the POWER button on the top cover or remote control again to turn off the power.
3. If the operation indicator LED is orange and blinking, do not disconnect(20 sec.) the power until the operation
indicator LED is lit constantly (orange).
• If the operation indicator LED is orange and blinking, the power button on the top cover or on the remote control will not
operate.
• This projector features the Quick Power On/Off function that allows a user to turn it on and off quickly.
Power off?
Please press Power key again.
* What is the Quick Power On/Off
function?
The projector enters into Standby mode without waiting until it is cooled.
If Standby mode continues for a certain amount of time, the projector can operate without cooling when it is turned on.
Loading ...
Loading ...
Loading ...