Perlick H50IMS-ADR User Manual

Loading ...

perlick customer service (800)558-5592 | 21

PERLICK RESIDENTIAL ICE MAKER MANUAL

STARTUP / MAINTENANCE

7. Inside the storage bin, disconnect the sucon tube by

squeezing the tabs and pulling the tube clear. See Fig. 24.

Allow the water tank to drain.

8. Reconnect the sucon tube as illustrated. See Fig. 25. Make

sure the tabs lock into place; a loose ng may cause a

water leak.

9. Remove the ice produced, then clean the storage bin liner,

door liner, and door gasket using a neutral cleaner. Rinse

thoroughly aer cleaning.

10. Move the control switch to the “ICE” posion to start the

automac ice making process.

11. To conrm bin control operaon, hold ice in contact with

the bin control thermostat bulb. If the icemaker does not

stop within 10 seconds, the bin control thermostat must be

adjusted. Installaons at higher altude locaons are more

likely to require adjustment.

Sucon Tube

Tabs

Water Tank

Drain

Fig. 24

Sucon Tube

Tabs

Fig. 25

MAINTENANCE

The appliance must be maintained in accordance with the

instrucon manual and labels provided with the appliance.

Consult with your local Perlick Cered Service Representave

about maintenance service. To obtain the name and phone

number of your local Perlick Cered Service Representave,

visit www.perlick.com.

Only qualied service technicians should

service the appliance.

Failure to install, operate, and maintain the

equipment in accordance with this manual will adversely

aect safety, performance, component life, and warranty

coverage.

To reduce the risk of electric shock, do not

touch the control switch or plug with damp hands. Make sure

the control switch is in the “OFF” posion before plugging in

or unplugging the appliance.

Move the control switch to the “OFF”

posion and unplug the appliance from the electrical outlet

before servicing.

CHOKING HAZARD: Ensure all components,

fasteners, and thumbscrews are securely in place aer any

maintenance is done to the appliance. Make sure that none

have fallen into the storage bin.

Do not place ngers or any other objects

into the ice discharge opening.

Aer service, make sure that there are no

wires pinched between the panels and appliance. Make sure

you do not damage or pinch the water supply line, drain line,

or power cord.

DANGER

Loading ...

Perlick H50IMS-ADR 15" ADA Compliant Stainless Steel Right Hinge Built-In Clear Ice Maker H50IMSADR

User Manual - Page 21