Loading ...
Loading ...
Loading ...
16 | perlick.com/residential
PERLICK RESIDENTIAL ICE MAKER MANUAL
INSTALLATION INSTRUCTIONS
Fig. 12
14. Mark the center point of the hinge (C1) and hinge (C2)
holes that extend over the overlay panel. See Fig. 12.
15. Remove the overlay panel from the door.
16. Drill 3/8” diameter holes 1/4” (7 mm) deep where you
marked on the overlay panel to accomodate the hinge
(C1) and hinge (C2) bushings.
Ensure that the back surface of overlay panel
is at before aaching.
WARNING
Mark the center point.
Hinge
ATTACHMENT OF OVERLAY PANEL TO
DOOR
1. Fasten the sheet metal bracket to the overlay panel
using the two M4×8 truss head screws provided. Snug
the screws, but do not ghten (See Fig. 13).
2. Temporarily fasten the overlay panel to the door using
2 of the M4×25 pan head screws provided (See Fig. 14).
Screws
Fig. 14
Fig. 13
Sheet Metal Bracket
Overlay Panel
Snug the screws,
but do not ghten.
Loading ...
Loading ...
Loading ...