Loading ...
Loading ...
Loading ...
25
en
Operation
Important information
If the seal is damaged or not correctly
positioned, liquid may run out.
Insert blade insert with blender/cutting
blade p into the blender jug and lock
anti-clockwise (m). Rotate the blade insert
at least until the arrow matches up with the
marking on the blender jug.
Turn blender jug over (blade insert face
down).
Attach the blender jug (match arrow on the
jug to the dot on the appliance .) and
rotate as far as possible in a clockwise
direction (,).
Add ingredients.
Maximum capacity, liquid = 1.0 litres
(frothing or hot liquids max. 0.4 litres).
Optimal processing capacity –
solids = 80 g.
Attach lid and press firmly. Hold lid while
working.
Insert the mains plug.
Set the rotary switch to the desired setting.
To add more ingredients, set the rotary
switch to P.
Remove the lid and add ingredients
or
remove the funnel and gradually add solid
ingredients through the refill opening
or
pour liquid ingredients through the funnel.
After using the appliance
Set the rotary switch to P.
Remove mains plug.
Rotate the blender in an anti-clockwise
direction and remove.
Remove lid.
Loosen blade insert clockwise (l) and
remove from the blender jug.
Clean all parts, see “Cleaning and
servicing”.
Universal cutter
Use (depending on model):
– With the blade insert with blender/cutting
blade p for cutting and chopping meat,
hard cheese, onions, herbs, garlic, fruit,
vegetables.
– With the blade insert with grinding blade
q for grinding and cutting fairly small
quantities of spices (e.g. pepper, cumin,
juniper, cinnamon, dried anise, saffron),
grain (e.g. wheat, millet, linseeds), coffee
and sugar. It is not intended for grinding
very dry, solid foods larger than coffee
beans such as nutmeg, dry ginger … .
Caution!
Only fill the appliance with roasted coffee or
espresso beans.
W Risk of injury from sharp blades /
rotating drive!
Do not remove/attach the universal cutter
until the drive has stopped.
Do not touch blades of the blade insert with
bare hands. Clean them with a brush.
Fig. F shows guide values for the maximum
quantities and processing times when
working with the universal cutter.
Fig. E
Put down universal cutter jug with the
opening face up.
Add food, which is to be cut, in the jug.
Note MAX mark on the jug!
Place seal on the blade insert. Ensure that
the seal is positioned correctly.
Important information
If the seal is damaged or not correctly
positioned, liquid may run out.
Insert blade insert (p/q) into the
universal cutter jug and lock anti-
clockwise (m). Rotate the blade insert at
least until the arrow matches up with the
marking on the universal cutter jug.
Turn universal cutter over (blade insert
face down).
Attach the universal cutter (arrow on jug
on dot on the appliance .) and rotate all
the way clockwise (,).
Insert the mains plug.
Set the rotary switch to the desired setting.
Loading ...
Loading ...
Loading ...