Loading ...
Loading ...
Loading ...
EN – 51
10. Turn impeller shaft by hand to make sure shaft rotates
easily.
See Figure 126.
11. Reinstall one flat steel washer into left side of
gearcase.
12. Align washer with gearcase hole and reinstall auger
shaft through gear.
IMPORTANT: Make sure auger shaft key aligns with gear
keyway.
See Figure 127.
13. Reinstall one flat steel washer and bushing onto right
auger shaft end.
IMPORTANT: Stepped-down side of bushing MUST be
positioned toward gearcase.
14. With a driver, such as a 1 1/4” deep-well socket, drive
bushing into gearcase until groove is just beyond
interior gearcase wall. See Figure 128.
Figure 125
Figure 126
Figure 127
Figure 128
Loading ...
Loading ...
Loading ...