Loading ...
Loading ...
Loading ...
EN – 42
Remove Chute Rotation Gear
Model 921326
IMPORTANT: Save all hardware for reinstallation
1. Stop engine, remove key and wait for all moving parts
to stop and for hot parts to cool.
2. Disconnect spark plug wire from engine.
3. Position discharge chute facing forward.
See Figure 100.
4. Remove hardware retaining chute gear cover and
remove cover.
5. Remove hairpin from hex rod and remove hex rod
from chute gears.
IMPORTANT: Support discharge chute so it remains
upright.
6. Remove hardware retaining chute rotation gear to
pedestal plate and remove gear. See Figure 101.
Install Chute Rotation Gear
Models 921045, 921046, 921047, 921048, 921049,
921323, 921324, 921325
IMPORTANT: Make sure discharge chute is positioned
forward.
See Figure 102.
1. Position chute rotation gear over chute mount bracket
so edge is square with bracket.
IMPORTANT: Make sure flat steel washer and friction
washer are positioned between chute mount bracket and
pedestal plate. See Figure 99.
2. Insert round head square neck bolt through chute
rotation gear.
3. Install friction plate and compression spring onto
round head square neck bolt and secure with top
locking flange nut.
IMPORTANT: Make sure notch in friction plate aligns with
tab on chute mount bracket.
Figure 100
1. Tapping Screw
2. Chute Gear Cover
3. Hairpin
4. Hex Rod
1
2
4
3
Figure 101
1. Center Locking Flange Nut
2. Flange Bushing
3. Hex Bolt
4. Chute Rotation Gear
1
4
3
2
Loading ...
Loading ...
Loading ...